1.0mm S250GD+Z Structural Galvanized Steel Sheet 1220×2440mm EN 10346

1.0mm S250GD+Z Structural Galvanized Steel Sheet 1220×2440mm EN 10346

1.00mm S250GD+Z galvanized steel sheet, sized 1220 × 2440 mm, manufactured to EN 10346. Designed for light steel structures, structural components, support frames, and general steel fabrication. The zinc coating provides corrosion protection, while the S250GD structural steel grade offers suitable strength for various construction and fabrication applications. Custom sizes and zinc coating specifications are available upon request.

  • Check Mark Mill Test Certificate Provided
  • Check Mark Strict Quality Inspection
  • Check Mark Custom Sizes Available
  • Check Mark On-Time Global Delivery

Sky Steel Group manufactures and exports structural-grade 1.00 × 1,220 × 2,440 mm hot-dip galvanized steel sheets (S250GD+Z / EN 10346). Specially produced for light gauge steel framing, pre-engineered structural sub-assemblies, industrial equipment housings, and heavy-duty HVAC ductwork, our 1.00mm (4×8 ft) galvanized steel plates feature a guaranteed minimum yield strength ($R_{eH} \ge 250\text{ MPa}$), tight zinc coating adhesion (Z60–Z275 g/m²), precision cut-to-length dimensional tolerances (±0.02 mm), and superior flat panel planarity.

High Yield Structural Strength, Rigid Press-Braking & Anti-Corrosion Protection

1.00 mm S250GD+Z structural galvanized sheet (1220×2440mm standard 4×8 ft dimension) provides the optimal balance of load-bearing tensile capacity and cold workability. The micro-alloyed carbon-manganese structural substrate delivers high resistance against mechanical deformation, oil-canning, and cyclic wind vibration, making it the preferred choice for commercial wall studs, ceiling tracks, electrical switchgear cabinets, and industrial chiller casings.

Continuous hot-dip zinc coating with passivation (Cr3+ chemical conversion) and anti-fingerprint (AFP) surface sealing ensures long-term barrier and cathodic protection against high ambient humidity, industrial pollutants, and coastal air. Secondary mill processing options include precision CNC punch pressing, fiber laser cutting, tight-radius press brake bending, custom length shearing, and seaworthy metal-encased pallet packaging.

1.00 × 1,220 × 2,440 mm S250GD+Z Structural Galvanized Sheet Specifications

ItemTechnical Specification / Standard Parameter
ProductHot-Dip Galvanized Structural Steel Sheet / GI Plain Sheet / Structural Galvanized Plate
Nominal DimensionsThickness: 1.00 mm × Width: 1,220 mm × Length: 2,440 mm (Standard 4 ft × 8 ft Sheet)
Base Metal & GradeS250GD+Z (Structural Steel per EN 10346) / ASTM A653 SS Grade 36 (Gr.250) / JIS G3302 SGC340
Applicable StandardsEN 10346, ASTM A653 / A653M, JIS G3302, GB/T 2518, AS 1397 (G250)
Yield Strength ($R_{eH}$)≥ 250 MPa (Guaranteed structural proof strength)
Tensile Strength ($R_m$)≥ 330 MPa (Range: 330 – 480 MPa)
Elongation ($A_{80}$)≥ 19% (Optimal balance of ductility and mechanical rigidity)
Zinc Coating MassZ60, Z90, Z120, Z140, Z180, Z275 g/m² (Total double-sided coating mass)
Spangle StructureZero Spangle (Skin-Passed / Extra Smooth) / Minimized Spangle / Regular Spangle
Surface TreatmentChromate-Free Passivation (Cr3+), Anti-Fingerprint (AFP / Thin Organic Coating), Light Oiled
Thickness Tolerance±0.02 mm (High-precision cold-rolled structural substrate)
Width & Length ToleranceWidth: 0 / +3.0 mm; Length: 0 / +5.0 mm; Diagonal Out-of-Square: ≤ 2.0 mm
Unit Weight / Sheet~23.58 kg per sheet (Approx. 42 to 43 sheets per Metric Ton)
Primary ApplicationsLight Steel Framing (C/U Studs & Tracks) / HVAC Air Handling Units / Electrical Enclosures / Cable Trays / Fire Doors
Inspection & CertificateEN 10204 3.1 Mill Test Certificate (MTC) / Tensile & Bending Reports / Zinc Weight Tests / SGS, BV Inspected
PackagingFully Enclosed Metal Box Packaging: VCI Anti-Rust Barrier + Galvanized Outer Shell + Solid Wooden Pallets

Need a Direct Factory Quote for 1.00×1220×2440mm S250GD+Z Galvanized Sheets?

Send us your required zinc coating mass (Z100–Z275), spangle structure, surface passivation, packet weight, and target port for an instant FOB / CIF wholesale price.

Where Are 1.00 × 1,220 × 2,440 mm S250GD+Z Galvanized Sheets Used?

Combining guaranteed yield strength ($R_{eH} \ge 250\text{ MPa}$), tight thickness tolerances, and uniform zinc coating, 1.00mm S250GD+Z structural galvanized steel sheets are widely utilized in precision machinery enclosures, HVAC air conditioning units, light gauge steel building components, and export containerized construction projects.

HVAC Equipment Casings, Air Handling Units & Electrical Cabinets

1.00 mm S250GD+Z sheet is engineered for stamping, deep punching, and press brake folding into outdoor air conditioner compressor chassis, ventilation fan housings, and industrial control switchboards. The high yield strength prevents structural sagging and panel drumming, while the adherent zinc layer maintains rust-free cut edges and screw hole perforations in humid plant environments.

1.00mm Galvanized Steel Sheet Fabricated into Air Conditioning Outdoor Unit Enclosure and Structural Frame

Factory Warehouse Stock & Precision Flattened Sheet Packs

Master galvanized coils undergo continuous skin-pass leveling and precision flying-shear cutting to deliver 100% dead-flat 1,220 × 2,440 mm sheets without center buckle or edge waves. Stored in neat, square-aligned stacks on heavy-duty steel I-beam skids, finished sheets are ready for automated suction-cup de-stacking on CNC turret punch and laser cutting lines.

High Planarity 1.00x1220x2440mm S250GD+Z Galvanized Steel Sheet Stacks in Factory Workshop

Seaworthy Metal Box Packaging & Forklift Container Loading

Packets are enveloped in multi-layer VCI anti-rust barrier film, fully encased in galvanized steel protective outer shells with reinforced corner brackets, and strapped tightly onto solid fumigated timber skids (2.0–2.5 MT per packet). Precision forklift-loaded and timber-chocked inside 20GP containers to guarantee zero mechanical indentation, water ingress, or transit friction during ocean voyages.

Metal Cased Export Packets of 1.00mm Galvanized Steel Sheets Being Loaded into Shipping Container

1.00 × 1,220 × 2,440 mm S250GD+Z Galvanized Sheet FAQ

Answers to technical inquiries covering S250GD structural grade properties, yield strength verification, zinc coating thickness, press-brake bending, and international container packaging.

What are the exact piece weight and dimensions of 1.00×1220×2440mm galvanized sheets?

Each 1.00 × 1,220 × 2,440 mm sheet covers an area of 2.977 m² and has a theoretical unit weight of approximately 23.58 kg (calculated at a steel density of 7.85 g/cm³ plus nominal zinc coating mass). There are approximately 42 to 43 sheets per Metric Ton. Export packets are generally bundled at 85–110 sheets per solid wooden skid (~2.0 to 2.5 MT per packet).

How does S250GD+Z structural grade differ from commercial forming grade DX51D+Z?

Under European standard EN 10346, S250GD+Z is a certified structural steel grade with a defined minimum yield point ($R_{eH} \ge 250\text{ MPa}$) and tensile strength between 330–480 MPa. Unlike standard commercial forming grades (DX51D) which focus primarily on ductility, S250GD provides certified load-bearing structural capacity, preventing deflection under high mechanical stress while retaining sufficient elongation ($\ge 19\%$) for press-brake bending and roll forming.

Which zinc coating weight (Z-mass) is recommended for light steel frames and electrical housings?

Zinc mass is specified based on indoor/outdoor environmental exposure:

• Z100 – Z140 g/m²: Standard specification for indoor electrical distribution boards, server racks, and interior dry-wall light gauge framing.
• Z180 – Z275 g/m² (Heavy Galvanized): Recommended for exterior HVAC condenser casings, industrial purlins, solar racking connectors, and high-humidity environments, delivering 25+ years of maintenance-free cathodic corrosion protection.

Will 1.00mm S250GD+Z crack or lose zinc adhesion during 90-degree press-brake bending?

No. S250GD+Z possesses excellent cold formability with a recommended minimum bending radius of $1.0t$ ($R = 1.0\text{ mm}$). The hot-dip zinc layer forms a tightly bound intermetallic Fe-Zn alloy layer that resists flaking, peeling, or micro-cracking even during repeated CNC press-brake bending, punching, and lock-seaming operations.

What surface passivations and skin-pass options are available for subsequent painting?

We provide multiple surface treatments to meet downstream manufacturing requirements:

• Zero Spangle + Skin-Passed: Extra smooth surface finish ideal for direct electrostatic powder coating or wet spray painting without surface prep sanding.
• Anti-Fingerprint (AFP): Clear organic transparent coating that prevents handling stains and increases corrosion resistance during assembly.
• Chromate-Free Passivation (Cr3+): Eco-friendly chemical conversion layer preventing white rust storage stains during ocean shipment.

How are 1.00mm galvanized sheets packaged for international 20GP container shipping?

Sheets are packed in heavy-duty Fully Enclosed Seaworthy Metal Box Packets: VCI anti-rust barrier paper + waterproof poly film + galvanized steel protective outer wrapping + heavy steel corner edge protectors. Each packet is strapped with 3 longitudinal and 3 transverse high-tensile steel bands onto solid fumigated timber skids. A standard 20GP container holds 10 to 12 packets (25–27 Metric Tons) secured with hardwood floor blocking.