3×3 GI Square Tubular
3×3 GI Square Tubular
3×3 GI Square Tubular is commonly specified for gate posts, perimeter fencing, and light structural assemblies. Its square profile accommodates welded brackets, mounting plates, and other connection components.
- Mill Test Certificate Provided
- Strict Quality Inspection
- Custom Sizes Available
- On-Time Global Delivery
3×3 GI Square Tubular is a galvanized square hollow steel section with a nominal cross-section of 3 × 3 inches (76.2 × 76.2 mm). In some markets, 75 × 75 mm is supplied as a metric alternative. These dimensions are not identical, so the required outside dimensions and tolerances should be specified when ordering.
The manufacturing method affects the coating characteristics of the finished tube. Pre-galvanized sections are generally formed from zinc-coated steel strip, while hot-dip galvanized sections receive their zinc coating after tube fabrication. Coating thickness and surface finish can be specified according to the intended service conditions.
For wholesale orders, buyers should confirm the steel grade, wall thickness, length, and applicable manufacturing standard. Bundle quantities, packing arrangements, and inspection documents can be agreed upon before shipment to simplify receiving and material verification.
Product Features
- Hollow Section Design: Open interior allows the use of compatible end caps and inserts.
- End Finishing: Tube ends can be deburred to remove sharp edges after cutting.
- Surface Appearance: Available with a natural galvanized finish without additional painting.
- Handling Convenience: Straight tubular sections are easy to position and organize during installation.
- Accessory Compatibility: Suitable for compatible tube connectors, sleeves, and protective caps.
Technical Specifications
| Specification | Available Range |
|---|---|
| Product Name | 3×3 GI Square Tubular |
| Material | Carbon Steel |
| Steel Grade | Q195, Q235 / ASTM A500 Grade B (as specified) |
| Nominal Size | 3 x 3 inches (76.2 x 76.2 mm) |
| Metric Alternative | 75 x 75 mm |
| Wall Thickness | 1.2-4.0 mm |
| Standard Length | 6 m |
| Custom Length | Available upon request |
| Manufacturing Process | ERW (Electric Resistance Welded) |
| Surface Treatment | Pre-Galvanized / Hot-Dip Galvanized |
| Zinc Coating | According to agreed specifications |
| Cross-Section | Square Hollow Section (SHS) |
| End Type | Plain Ends |
| Packing | Steel Strip Bundles |
Applications

3×3 GI Square Tubular is used in residential construction, outdoor installations, and custom steel assemblies. Its square hollow profile can be incorporated into different support systems, with material thickness, fastening methods, and structural requirements determined by the intended application. The following examples illustrate four common uses.
- Residential Gates & Entrances:
Used for entrance posts, pedestrian gate frames, and supporting sections in residential properties. Square tubes can be combined with hinges, locking hardware, and horizontal members. Post foundations and connections should be selected according to gate dimensions, weight, and operating conditions. - Awnings & Walkway Covers:
Installed in entrance awnings, covered walkways, and small roof extensions. Tubular sections can form vertical supports and horizontal framing beneath metal or polycarbonate roofing. Member spacing, anchoring, and wind resistance should be checked against local building requirements. - Solar Panel Support Frames:
Used in selected ground-mounted solar structures as support posts, braces, or secondary framing members. Tube dimensions, coating requirements, and connection details should be matched to the mounting system design. Wind loads and long-term outdoor exposure must be considered. - Storage Racks & Shelving:
Incorporated into custom workshop shelving, storage frames, and equipment racks. Square hollow sections can be joined with crossmembers and reinforcement plates to form supporting assemblies. Load capacity, shelf spacing, and joint strength should be verified for the intended storage conditions.
Frequently Asked Questions (FAQ)
1. Is 3×3 GI Square Tubular the same as 75×75 mm square tubing?
Not exactly. A 3 × 3-inch tube measures 76.2 × 76.2 mm, while a 75 × 75 mm tube is slightly smaller. Both sizes may be available in the market, so buyers should confirm the actual outside dimensions before ordering.
2. How much does a 3×3 GI Square Tubular weigh?
For a nominal 3 × 3-inch (76.2 × 76.2 mm) square tube with a 2.0 mm wall thickness, the theoretical weight is approximately 4.66 kg/m, or 27.96 kg per 6-meter length. Actual weight may vary due to corner radii and manufacturing tolerances.
3. Which wall thickness should I choose for 3×3 GI Square Tubular?
Wall thickness depends on the intended load, span, and installation method. Common options include 1.2 mm, 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, and 4.0 mm. Structural applications require appropriate engineering verification.
4. Can 3×3 GI Square Tubular be welded or drilled?
Yes. GI square tubing can generally be cut, drilled, and welded using suitable fabrication methods. Welding galvanized steel requires proper ventilation and fume controls, and exposed steel at welded or cut areas should receive appropriate corrosion protection.
5. What affects the price of 3×3 GI Square Tubular in the Philippines?
The main factors are wall thickness, actual outside dimensions, steel grade, zinc coating, order quantity, and shipping costs. Buyers should compare quotations using the same specifications rather than price per piece alone.
6. What information is needed to order 3×3 GI Square Tubular for the Philippines?
Specify the required outside dimensions (76.2 × 76.2 mm or 75 × 75 mm), wall thickness, length, galvanized finish, and quantity. For imported orders, include the destination port, such as Manila or Cebu, and the preferred shipping terms.





