GI Rectangular Steel Tube

GI Rectangular Steel Tube

GI Rectangular Steel Tubes combine a zinc-coated finish with a practical rectangular profile for metal fabrication and structural assemblies. Flat external faces accommodate mounting plates and mechanical connections, making these tubes suitable for equipment frames, storage systems, and prefabricated steel components.

  • Check Mark Mill Test Certificate Provided
  • Check Mark Strict Quality Inspection
  • Check Mark Custom Sizes Available
  • Check Mark On-Time Global Delivery

GI Rectangular Steel Tube, also known as Galvanized Rectangular Hollow Section (RHS), is commonly produced from cold-formed, electric resistance welded (ERW) carbon steel. Typical section sizes include 40 × 20 mm, 60 × 40 mm, 100 × 50 mm, and 150 × 100 mm, with wall thicknesses ranging from 1.5 to 6.0 mm for many general fabrication applications.

Common material options include Q235B, Q355B, ASTM A500 Grade B/C, and EN 10219 structural hollow sections in grades such as S235JRH and S355J2H. Pre-galvanized tubes may use zinc coating designations such as Z100 or Z275, while hot-dip galvanized finished sections can be specified to ISO 1461 for coating thickness and inspection requirements. These material grades and coating requirements are also important when selecting galvanized steel tubing for structural and industrial applications.

For fabrication projects involving galvanized steel pipe, buyers often specify 5.8 m or 6 m lengths, with cut-to-size options for frames, brackets, and equipment assemblies. Orders can include agreed dimensional tolerances, zinc coating requirements, and Mill Test Certificates (MTCs) to support material verification and project documentation. These specifications help ensure that galvanized steel products meet the requirements of different fabrication and construction projects.

Product Features

  • Directional Load Performance: The unequal width and height provide different bending stiffness along the two principal axes, allowing the section to be oriented according to structural loading requirements.
  • Torsional Rigidity: The closed hollow cross-section offers useful resistance to twisting, making it suitable for structural members subjected to combined loading conditions.
  • Efficient Material Distribution: Steel is concentrated around the perimeter rather than at the center, providing an efficient balance between section weight and bending resistance.
  • Reduced Internal Water Accumulation: Properly designed drainage openings and end details help prevent trapped moisture inside hollow sections, reducing the risk of internal corrosion.
  • Improved Handling Efficiency: The straight, uniform profile allows tubes to be stacked, bundled, and secured efficiently, simplifying warehouse handling and container loading.
  • Predictable Structural Calculations: Standardized section geometry enables engineers to calculate cross-sectional area, second moment of area, section modulus, and radius of gyration for structural design.

Product Specifications

ParameterSpecification
Product NameGI Rectangular Steel Tube
Alternative NameGalvanized Rectangular Hollow Section (RHS)
MaterialCarbon Steel / Structural Steel
Steel GradeQ235B, Q355B, ASTM A500 Grade B/C, S235JRH, S355J2H
Cross-SectionRectangular Hollow Section (RHS)
Typical Sizes40 × 20, 60 × 40, 80 × 40, 100 × 50, 120 × 60, 150 × 100, 200 × 100 mm
Wall Thickness1.5–6.0 mm (reference range)
Standard Length5.8 m / 6.0 m
Manufacturing ProcessCold Forming / Electric Resistance Welding (ERW)
Structural StandardsASTM A500/A500M, EN 10219 (as specified)
Galvanizing OptionsPre-Galvanized / Hot-Dip Galvanized After Fabrication
Pre-Galvanized CoatingZ100 / Z275 (where specified)
Post-Fabrication Galvanizing StandardISO 1461 / ASTM A123/A123M
Zinc Coating ThicknessAccording to the selected galvanizing process and coating specification
Dimensional ToleranceAccording to the applicable product standard
End TypePlain Ends / Cut-to-Length
Surface FinishZinc-Coated / Hot-Dip Galvanized
Quality InspectionDimensions, Weld Integrity, Surface Condition, Zinc Coating
DocumentationMill Test Certificate (MTC) / Inspection Report
PackagingSteel-Strapped Bundles

Applications

GI Rectangular Steel Tube applications in equipment support frames, storage systems, industrial platforms, and solar mounting structures

GI Rectangular Steel Tubes, also known as Galvanized Rectangular Hollow Sections (RHS), are used in industrial fabrication projects requiring practical structural configurations and zinc-coated steel components. The following applications demonstrate how rectangular tubes can be incorporated into different assemblies.

  • Equipment Support Frames:
    Used to fabricate machinery bases, pump stands, motor support frames, and industrial equipment platforms. Rectangular hollow sections can form horizontal beams, vertical supports, and bracing members. Structural dimensions and connection details are selected according to equipment weight, vibration, and operating conditions.
  • Storage and Shelving Systems:
    Applied in warehouse shelving, storage racks, and material-handling structures. GI rectangular steel tubes can be used for upright frames, horizontal supports, and reinforcement members. Load capacity depends on the section properties, connection design, and overall rack configuration.
  • Industrial Platforms and Walkways:
    Used in maintenance platforms, access walkways, and elevated industrial structures. Rectangular steel tubes can form supporting frames and secondary structural members. Platform designs must account for imposed loads, deflection limits, connection strength, and applicable safety requirements.
  • Solar Mounting Structures:
    Used in selected ground-mounted solar panel systems as support posts, cross-members, and bracing components. Galvanized rectangular hollow sections provide framing options for outdoor installations, with coating specifications and structural dimensions selected according to site conditions and design loads.

Frequently Asked Questions (FAQ)

1. Is GI Rectangular Steel Tube the same as Galvanized Rectangular Hollow Section (RHS)?

Both terms commonly refer to zinc-coated rectangular steel tubes. GI Rectangular Steel Tube is widely used in commercial trading, while Galvanized Rectangular Hollow Section (RHS) is more common in structural engineering and technical specifications.

However, the GI designation alone does not confirm structural compliance. For load-bearing applications, buyers should specify the required steel grade, structural standard, and galvanizing process.

2. What is the difference between pre-galvanized and hot-dip galvanized rectangular steel tubes?

Pre-galvanized tubes are formed from zinc-coated steel strip and joined by electric resistance welding (ERW). Welding heat can damage the zinc coating along the longitudinal seam and adjacent heat-affected areas. These areas may be protected using zinc-rich coatings or thermal zinc spraying.

Post-fabrication hot-dip galvanized tubes are immersed in molten zinc after forming and welding. This allows zinc to reach accessible external and internal surfaces when proper ventilation and drainage provisions are provided.

3. How do I choose the correct size and wall thickness for GI rectangular steel tubes?

Section selection depends on span, applied loads, allowable deflection, and connection design.

For example, a 60 × 40 × 2.0 mm tube and a 100 × 50 × 3.0 mm tube have different bending stiffness, section modulus, and weight per meter. A larger section is not automatically suitable for every application.

For structural projects, buyers should provide the required dimensions, steel grade, member length, and loading conditions for engineering evaluation.

4. Which ASTM and EN standards apply to galvanized rectangular hollow sections?

ASTM A500/A500M and EN 10219 cover structural hollow sections under their respective manufacturing and material requirements.

For galvanizing, the applicable specifications depend on the production process:

  • ASTM A123/A123M or ISO 1461: Hot-dip galvanizing of fabricated steel articles.
  • ASTM A653/A653M or EN 10346: Continuously hot-dip coated steel sheet or strip used to manufacture pre-galvanized tubes.

Coated strip standards do not automatically establish compliance of the finished welded tube with structural hollow-section requirements.

5. Can GI rectangular steel tubes be cut, drilled, or welded after delivery?

Yes. Rectangular tubes can be cut, drilled, and welded using suitable fabrication procedures.

Welding galvanized steel requires appropriate ventilation and exposure controls because zinc-containing fumes can be hazardous. Cutting and welding can also remove the protective coating.

Exposed steel and damaged coating areas should be repaired using an appropriate corrosion protection method. ASTM A780/A780M provides recognized repair procedures for damaged hot-dip galvanized coatings where applicable.

6. What information is required when requesting a quotation for GI rectangular steel tubes?

A complete inquiry should include outside dimensions, wall thickness, steel grade, length, quantity, galvanizing method, and delivery destination.

Example: GI Rectangular Steel Tube — 100 × 50 × 3.0 mm, Q235B (GB/T 700), 6 m length, manufactured from pre-galvanized Z275 steel strip, 20 MT.

Buyers should also specify dimensional tolerances, coating requirements at the weld seam, inspection documents, and packaging preferences. If EN 10204 Type 3.1 inspection certificates are required, this should be agreed before production.