China Galvanized Square Hollow Section

China Galvanized Square Hollow Section

China Galvanized Square Hollow Sections (SHS) are supplied in pre-galvanized and hot-dip galvanized finishes, with steel grades and wall thicknesses selected according to project specifications. Available to relevant ASTM and EN standards, these structural tubes offer defined dimensional tolerances and zinc coating requirements for international procurement.

  • Check Mark Mill Test Certificate Provided
  • Check Mark Strict Quality Inspection
  • Check Mark Custom Sizes Available
  • Check Mark On-Time Global Delivery

China Galvanized Square Hollow Section (SHS) features a uniform square cross-section with four flat sides and rounded corners. Its hollow profile provides an efficient balance between structural strength and material weight, making it suitable for welded assemblies, load-bearing frames, and fabricated steel components.

The manufacturing process typically involves forming steel strip into a square tubular profile through roll-forming and high-frequency welding. The welded seam is controlled during production, while straightness, corner geometry, and surface condition are inspected to maintain consistent product quality.

As part of the broader galvanized steel pipe category, square hollow sections provide flat contact surfaces for cutting, drilling, bolting, and connection to other structural members. For structural projects, connection design and load conditions should be evaluated before fabrication, particularly where welding or additional machining is required.

Product Features

  • Surface Finish: Uniform surface appearance with no visible cracks, severe scratches, or excessive zinc buildup.
  • End Condition: Clean-cut tube ends with burr removal available according to order requirements.
  • Quality Inspection: Visual checks and dimensional measurements can be arranged before shipment.
  • Product Traceability: Batch identification and inspection documents can be provided upon request, subject to order arrangements.
  • Export Packaging: Bundled packing with steel straps and protective wrapping options for transportation and handling.

Technical Specifications

ParameterSpecification
Product NameGalvanized Square Hollow Section (SHS)
Steel GradeQ195, Q235B, Q355B, S235JR, S355JR
StandardASTM A500, EN 10219, GB/T 6728 (as applicable)
Section Size20 × 20 – 300 × 300 mm
Wall Thickness1.0 – 12.0 mm
Standard Length6 m, 12 m
Surface TreatmentPre-Galvanized / Hot-Dip Galvanized
Zinc CoatingAccording to galvanizing process and order requirements
Manufacturing MethodERW / High-Frequency Welding
Cross-SectionSquare, Hollow
End TypePlain Ends
PackagingSteel Strap Bundles

Applications

China Galvanized Square Hollow Section Applications in Building Structures, Greenhouse Frames, Fencing Systems and Industrial Structures

Galvanized square hollow sections are widely incorporated into construction, agricultural, and industrial projects requiring rigid steel frameworks. Their use depends on structural loading, connection arrangements, installation conditions, and environmental exposure. The following applications illustrate common uses of galvanized square steel sections.

  • Building Structures:
    Used in roof support frames, secondary structural members, building extensions, and prefabricated steel assemblies. Section dimensions and connection details should be selected according to structural design requirements and applicable building codes.
  • Greenhouse Frames:
    Installed as vertical posts, horizontal supports, and bracing members in agricultural greenhouses and protected growing facilities. Frame spacing, wind loads, and local environmental conditions should be considered during structural design.
  • Fencing Systems:
    Used for fence posts, gate frames, perimeter barriers, and security enclosures in residential, commercial, and agricultural properties. Post spacing, anchoring methods, and panel connections depend on fence height and installation requirements.
  • Industrial Structures:
    Applied in equipment support frames, factory partitions, maintenance platforms, and auxiliary steel assemblies. Structural loading, vibration, connection design, and installation conditions should be evaluated before selecting the appropriate section.

Frequently Asked Questions (FAQ)

1. What is the difference between pre-galvanized and hot-dip galvanized square hollow sections?

Pre-galvanized SHS is formed from zinc-coated steel strip, while post-fabrication hot-dip galvanized SHS is galvanized after tube manufacturing. The latter generally provides more complete coating coverage, including exposed weld areas, depending on the galvanizing process.

2. Which standards apply to galvanized square hollow sections?

Structural requirements may follow ASTM A500, EN 10219, or applicable GB standards. Galvanizing requirements are specified separately, such as ISO 1461 or ASTM A123/A123M for suitable post-fabrication hot-dip galvanized products. The applicable standards should be confirmed before ordering.

3. How is the zinc coating thickness verified?

Coating thickness can be checked using calibrated magnetic thickness gauges, while coating mass may be determined through appropriate test methods. Inspection procedures and acceptance criteria depend on the galvanizing process and the specified coating standard.

4. Can galvanized square hollow sections be welded?

Yes. However, welding galvanized steel requires suitable ventilation, exposure controls, and appropriate procedures because zinc fumes can be hazardous. Damaged coating near the weld should be repaired using an approved zinc-rich coating or another specified repair method.

5. What quality documents can be provided with an order?

Depending on the purchase agreement, documents may include material test certificates, dimensional inspection reports, and galvanizing inspection records. Buyers requiring EN 10204 Type 3.1 certification should confirm its availability before production.

6. What information is required when requesting a quotation?

Buyers should provide the required section dimensions, wall thickness, length, steel grade, galvanizing method, quantity, and destination port. Any specific coating, testing, certification, or packaging requirements should also be stated to ensure an accurate quotation.