IPE300 300×150mm Weldable Steel I Beam
IPE300 300×150mm Weldable Steel I Beam
This IPE300 steel I beam measures 300×150mm, hot rolled from S235JR carbon steel. It is weldable and suitable for general structural jobs. Standard lengths 6m,9m,12m, custom cutting available. Widely used in building frames, mezzanines and light bridge supports. Strict dimension control for easy on-site installation.
- Mill Test Certificate Provided
- Strict Quality Inspection
- Custom Sizes Available
- On-Time Global Delivery
This IPE300 I beam has a nominal size of 300×150mm, hot rolled from S235JR carbon steel. The section is weldable and easy to cut, drill or bolt on site, fitting most standard structural connections. Standard supply lengths are 6m, 9m and 12m. We also offer custom cutting to your required length for project needs.
Tight dimensional tolerances keep assembly straightforward, no extra grinding needed for most connections. This beam works well for building frames, mezzanine floors, platform supports and light bridge structures. Material test certificates can be provided upon request to meet your project inspection requirements.
Our IPE300 follows European IPE profile standards. Surface comes as plain hot rolled finish; hot-dip galvanizing is available as an extra option if anti-rust protection is required for outdoor or humid environments. We pack beams in bundles for safe sea transport and can load directly into containers.
Product Features
| Item | Features |
|---|---|
| 1. Profile & Size | IPE300 European standard I beam, nominal dimension 300×150mm, consistent section geometry |
| 2. Material | S235JR hot rolled carbon steel, fully weldable, easy to cut and drill on site |
| 3. Length option | Standard lengths 6/9/12m, custom cut-to-length service available per your drawings |
| 4. Surface finish | Mill hot rolled finish as default; hot dip galvanizing optional for outdoor use |
| 5. Tolerance | Made to EN standard dimensional tolerances for simple field assembly |
| 6. Documentation | MTC material test certificates supplied upon request for project inspection |
Product Applications
- Building frames: Used as primary or secondary beams in commercial and industrial steel frames, supporting floor, roof and wall loads.
- Mezzanine floors: Installed as main support members for warehouse and factory mezzanines, creating additional floor area on a reliable steel structure.
- Platform supports: Applied to work platforms, equipment platforms and maintenance access structures where consistent strength and easy connection are required.
- Light bridge structures: Suitable for pedestrian bridges, short-span access bridges and light industrial bridge crossings.
Frequently Asked Questions About IPE300 300×150mm Weldable Steel I Beam
1. What material grade is your IPE300 300×150mm I beam?
Standard grade is S235JR hot rolled carbon steel. Other grades like S355JR can be supplied upon request.
2. Can you cut IPE300 beams to custom lengths?
Yes. Standard lengths are 6m,9m,12m. We offer cut-to-length service to match your project requirements.
3. Do you provide MTC for the IPE300 steel beam?
Material test certificates are available free on request before shipment, for your site inspection.
4. Is hot dip galvanizing available for IPE300?
Yes. Bare hot rolled finish is standard. Galvanizing is an extra option for outdoor, wet or corrosive environments.
5. Can this IPE300 beam be welded on site?
Absolutely. S235JR steel is fully weldable. It can also be drilled, cut and bolted for field assembly.
6. What tolerance standard do your IPE300 beams follow?
Products comply with EN European standards, with controlled dimensional tolerances for easier fitting.
